CERAMIC SOLDERING BOARD HEAT PLATE 6″ x 4″ x 1″ THICK Soldering Board Ceramic Board 6″ x4″ x 1/2″ Thick, use for welding and soldering as well as a protective heat plate, surface protection when melting on the bench. This ceramic board provides for a heating surface to solder, can also be used for whenever melting metal as an insulation plate. The board comes with 4 rubber feet which elevate and keep the board from direct contact of the surface, providing with air circulation. Rubber feet can be removed and are replaceable, to use opposite side It has a high temperature tolerance of up to 2000ºF / 950ºC. Board is made of high temperature refractory ceramic material (Non-Asbestos). It is very durable and hard with smooth work surface. This board is popular Silversmiths and Jewelers, due to its compact size, used for soldering and welding Jewelry items on the bench. SPECIFICATIONS: JETS Product# 1922-406041 Made in USA – Dimensions: 6″ x 4″ x 1″ Thick (152mm x100mm x 25mm) – Temperature Tolerance: Up to 2000ºF / 950ºC. – Reflects Heat – Ceramic (Non-Asbestos) – Board Weight: 1.65Lb NOTE: Visit JETSINC our ebay Store Listings, where you can see many other soldering boards and supplies along with Jewelry Soldering accessories including Torches, Solder, Fluxes and a line of Jewelers Equipment Tools and Supplies.JETS Inc. 1.65Lb 624 CKSP
Soldering Board 3-1/2″x8″x1″ Block Ceramic Heat Plate Solder Jewelry & Melting
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 CERAMIC BOARD HEAT PLATE 3-1/2″ x 8″ x 1″ Thick HIGH TEMPERATURE SOLDERING BOARD – use for Soldering, Melting and Welding as well as a protective heat plate. Surface protection when melting on the bench. This ceramic board provides a surface shield to solder, can also be used for whenever melting metal as an insulation plate. Plate weight is over 2 Lbs – will stay put. Note: Last Picture with 3rd Hand and Tweezers is only to show product… The board comes with 4 rubber feet which elevate and keep the board from direct contact of the surface, providing with air circulation. Rubber feet are not mounted, can be removed and are replaceable, to use opposite side. Note: Board should not be used directly on any combustible surface, may cause a Fire Hazard! Make sure to always anneal the board prior to use! This can be done simply with a torch applying light even heat to the surface of the plate Board is made of high temperature refractory ceramic material (Non-Asbestos) with a high temperature tolerance of up to 2000ºF / 950ºC.Board is very durable and hard with smooth work surface, yet it is a Fragile Piece of Ceramic and should be handled such.This board is popular Silversmiths and Jewelers, due to its compact size, used for soldering and welding Jewelry items on the bench. SPECIFICATIONS: JETS Product# 1922-43508 Made in USA – Dimensions: 3-1/2″ x 8″ x 1″ Thick – 92mm x 255mm x 25.5mm (May slightly Vary +/-) – Temperature Tolerance: Up to 2000ºF / 950ºC – Reflects Heat – Ceramic (Non-Asbestos) – Board Weight: 2Lbs – 900gr NOTE: For Larger Sizes please feel free to contact us, we can go up to 20″ x 20″ Ceramic with 1″ thickness. Visit JETSINC our ebay Store Listings, where you can see many other soldering supplies and accessories and a line of Jewelers Equipments Tools and Supplies. JETS Inc. 624 2L CKSP
Soldering Board 3-1/2″x10″x1″ Block Ceramic Heat Plate Solder Jewelry & Melting
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 CERAMIC BOARD HEAT PLATE 3-1/2″ x 10″ x 1″ Thick HIGH TEMPERATURE SOLDERING BOARD – use for Soldering, Melting and Welding as well as a protective heat plate. Surface protection when melting on the bench. This ceramic board provides a surface shield to solder, can also be used for whenever melting metal as an insulation plate. Plate weight is over 2 Lbs – will stay put. Note: Last Picture with 3rd Hand and Tweezers is only to show product… The board comes with 4 rubber feet which elevate and keep the board from direct contact of the surface, providing with air circulation. Rubber feet are not mounted, can be removed and are replaceable, to use opposite side. Note: Board should not be used directly on any combustible surface, may cause a Fire Hazard! Make sure to always anneal the board prior to use! This can be done simply with a torch applying light even heat to the surface of the plate Board is made of high temperature refractory ceramic material (Non-Asbestos) with a high temperature tolerance of up to 2000ºF / 950ºC.Board is very durable and hard with smooth work surface, yet it is a Fragile Piece of Ceramic and should be handled such.This board is popular Silversmiths and Jewelers, due to its compact size, used for soldering and welding Jewelry items on the bench. SPECIFICATIONS: JETS Product# 1922-43510 Made in USA – Dimensions: 3-1/2″ x 10″ x 1″ Thick – 92mm x 255mm x 25.5mm (May slightly Vary +/-) – Temperature Tolerance: Up to 2000ºF / 950ºC – Reflects Heat – Ceramic (Non-Asbestos) – Board Weight: 2.5Lbs – 1.2Kgs NOTE: For Larger Sizes please feel free to contact us, we can go up to 20″ x 20″ Ceramic with 1″ thickness. Visit JETSTOOLS our ebay Store Listings, where you can see many other soldering supplies and accessories and a line of Jewelers Equipments Tools and Supplies. JETS Inc. 713 3L 7X-LB 18.10LZ CKP Z M
Soldering Board Jewelry Soldering Block 6″ x 4″ x 1/2″ Ceramic Heat Plate 6×4
CERAMIC SOLDERING BOARD HEAT PLATE 6″ x 4″ x 1/2″ THICK Soldering Board Ceramic Board 6″ x4″ x 1/2″ Thick, use for welding and soldering as well as a protective heat plate, surface protection when melting on the bench. This ceramic board provides for a heating surface to solder, can also be used for whenever melting metal as an insulation plate. The board comes with 4 rubber feet which elevate and keep the board from direct contact of the surface, providing with air circulation. Rubber feet can be removed and are replaceable, to use opposite side It has a high temperature tolerance of up to 2000ºF / 950ºC. Board is made of high temperature refractory ceramic material (Non-Asbestos). It is very durable and hard with smooth work surface. This board is popular Silversmiths and Jewelers, due to its compact size, used for soldering and welding Jewelry items on the bench. SPECIFICATIONS: JETS Product# 1922-4064 Made in USA – Dimensions: 6″ x 4″ x 1/2″ Thick (152mm x100mm x 12.7mm) – Temperature Tolerance: Up to 2000ºF / 950ºC. – Reflects Heat – Ceramic (Non-Asbestos) – Board Weight: 14oz. NOTE: Visit JETSINC our ebay Store Listings, where you can see many other soldering boards and supplies along with Jewelry Soldering accessories including Torches, Solder, Fluxes and a line of Jewelers Equipment Tools and Supplies.JETS Inc. B15 421 CKSP Z M P