6″ 150mm SINTERED Diamond Blade Saw Lapidary Saws Rock Slab Trim Code WYP-150-25.4 This is a new sintered lapidary rock saw blade Product Specification: Product Name: 6 inch diamond saw blade, 150mm diamond blade, Lapidary diamond sawOutside Diameter: 150mm (6″)Core Thickness: 0.55mm (0.022″)Rim Thickness: 1mm (0.039″) ,at rim where diamonds areHole Diameter: 25.4mm (1″) With the bushing 25.4-16mm, can be used on 16mm(5/8″) arbor with a bushingRim Width: 6mmQuantity: Only 1 PieceThis blade will perform well on any hardness rockDesigned for use on hard lapidary materials like agate, jasper, petrified wood, agates and geodesThe diamonds are sintered into the edge of the bladeMore diamonds in the sintered rim and a stiffer core make this blade cut faster and provide a long use-life, more durable than the Notched Rim Lapidary Diamond Saw BladeUse with light oil or water as a lubricantNew, Unused Blade – Not in Original PackagingThese blades were originally packaged in oil so you will see several oil spots on the surfaceDiamonds series blades are a great low cost choice for your lapidary sawWe will send out your order within 1-2 days after payment has been received and cleared
6-12″ inch 150-300mm Diamond Lapidary Saw Blade Notched Rim Core Thickness 1.0mm
Rim thickness: 0.05-0.055″(1.3-1.4mm) at notched rim where diamonds are. More diamonds in the notched rim and a stiffer core make this blade cut faster and provide a long use-life. This blade will perform well on most types of hardness rock.
6”in 150 mm SINTERED Diamond Lapidary Saw Blade Slab Trim Cutting Jewelry Tools
Slab Trim Cutting J e welry Tools for Stone Ge mstone A gate Jasper. More diamonds in the sintered rim and a stiffer core make this blade cut faster and provide a long use-life, More durable than the Notched Rim Lapidary Diamond Saw Blade.
6″ inch 150 mm Notched Rim Diamond Lapidary Saw Blades Rock Slab Tools for Stone
JINGLING 6″ inch Notched Rim Diamond Lapidary Saw Blade Rock Slab For Gemstone Code ZYP-150*0.5/0.8/1.0*16mm Product Specification: Product Name: Lapidary saw blades, Gem stone cutting saw Outside Diameter: 6″ inch (150mm) Core Thickness: 0.5mm (0.02″) / 0.8mm(0.03″) /1.0mm(0.04″) You can choose Core Thickness (0.5mm / 0.8mm /1.0mm ) from the dropdown menu Hole Diameter: 16mm (5/8″) , with a bushing 16-12.7mm Recommend RPM: 2550 RPM Quantity: Only 1 Piece The diamonds are crimped into the edge of the blade More diamonds in the notched rim and a stiffer core make this blade cut faster and provide a long use-life. This blade will perform well on most of the hardness rock It has held up extremely well and cuts just about most kind of rock, from the very soft petoskey stone fossils to hard jasper, petrified wood, geodes. We don’t recommend using this blade to cut too hard materials, such as: agate with a Morse hardness of 6-7. Because it is difficult to cut or the blade will be damaged quickly Use with light oil or water as a lubricant 8″ inch notched rim lapidary saw blade. A high concentration diamonds are crimped into the rim. These saw blades work well with most lapidary materials and are a very affordable alternative to name brand blades. New, Unused Blade – Not in Original Packaging These blades were originally packaged in oil so you will see several oil spots on the surface. ​We can list any size (outer diameter from 4 – 24 in) & amount of this product
2Pcs 6″ inch 150mm Diamond Lapidary Saws Blade Arbor 5/8 Trim Stone Thin Rim
Arbor hole : 5/8″(16mm). Arbor Hole. Rim Thickness. Used for Trimming: They are excellent for trimming small shapes into stones. These blades are manufactured by crimping synthetic diamonds directly into the edge of the saw blade.
5Pcs 6″ inch 150mm Diamond Lapidary Saws Thin Rim Trim Saw Blade Disc Arbor 1/2″
JINGLING 5Pcs 6″ inch Super-Thin Diamond Lapidary Saw Blade Cutting Disc with Arbor Hole 1/2″ Rim Jewelry Tools for Gemstone Code 150*0.25/0.28/0.3/0.5*12.7mm Product Specification: Product Name: Lapidary trim saw, Gem stone cutting saw, Jewelers saw Outside Diameter : 6″ (150mm)Arbor hole : 1/2″(12.7mm), only applicable to gem cutting machine with half-inch shaft (12.7mm)Core Thickness: 0.25/ 0.28/ 0.3/ 0.5 mm , please choose Core Thickness you need Quantity: Only 5 Pcs Recommend RPM: 2550 RPM Product Description: Exclusively designed for processing materials for softer high value rocks like turquoise, gaspeite, opals. These blades are manufactured by crimping Synthetic diamonds directly into the edge of the saw blade. They are best suited for turquoise, opal, glass, and stones in the 4-6 range on the Mohs hardness scale. We don’t recommend using this blade to cut too hard materials, such as: agate and jadeite with a Morse hardness of 6-7. Because it is difficult to cut or the blade will be damaged quickly Advantages: achieving satisfactory cutting results and reducing unnecessary material consumption. This thin diamond lapidary saw blade offers a very good cost effective option for those that want either very thin kerfs or plan on short term use. Used for Trimming: They are excellent for trimming small shapes into stones. This simply means that these blades are meant for small material, not large or slabbing techniques. Also, these blades operate in a single direction so make sure that the arrow on the blade is pointed towards you when mounting. Use with water as a lubricant. New, Unused Blade – Not in Original Packaging These blades were originally packaged in oil so you will see several oil spots on the surface. We will send out your order within 1-2 days after payment has been received and cleared. Please let us know if you are looking for other accessories or hardware We Can List Any Size( Outer Diameter from 60mm – 250mm) & Amount Of This Product Note: Arbor hole is 1/2″(12.7mm), it’s only applicable to gem cutting machine with half-inch shaft. If the shaft of machine is 5/8″, the saw blade can’t be installed normally
5Pcs 6″ inch 150mm Diamond Lapidary Saws Blade Thin Rim Trim Stone Arbor 5/8″
JINGLING 5Pcs 6″ inch Super-Thin Rim Diamond Lapidary Saw Blade Cutting Disc Arbor Hole 5/8″ Jewelry Tools for Gemstone Code 150*0.23/0.28/0.3/0.5*16mm Product Specification: Product Name: Lapidary trim saw, Gem stone cutting saw, Jewelers saw Outside Diameter : 6″ (150mm) Arbor hole : 5/8″(16mm) Core Thickness: 0.23/ 0.28/ 0.3/ 0.5 mm , please choose Core Thickness you need Outside Diameter Core Thickness Rim Thickness Arbor Hole Quantity Code 150 mm (close to 6″) 0.23mm (0.009″) 0.28mm (0.011″) 16mm (5/8″) 5 Pieces 150*0.23*16 150 mm (close to 6″) 0.28mm (0.011″) 0.36 mm (0.014″) 16mm (5/8″) 5 Pieces 150*0.28*16 150 mm (close to 6″) 0.3mm (0.012″) 0.4mm (0.016″) 16mm (5/8″) 5 Pieces 150*0.3*16 150 mm (close to 6″) 0.5mm (0.02″) 0.53 mm (0.021″) 16mm (5/8″) 5 Pieces 150*0.5*16 Quantity: Only 5 Pcs Recommend RPM: 2550 RPM Product Description: Exclusively designed for processing materials for softer high value rocks like turquoise, gaspeite, opals. These blades are manufactured by crimping synthetic diamonds directly into the edge of the saw blade. They are best suited for turquoise, opal, glass, and stones in the 4-6 range on the Mohs hardness scale. We don’t recommend using this blade to cut too hard materials, such as: agate and jadeite with a Morse hardness of 6-7. Because it is difficult to cut or the blade will be damaged quickly Advantages: achieving satisfactory cutting results and reducing unnecessary material consumption. This thin diamond lapidary saw blade offers a very good cost effective option for those that want either very thin kerfs or plan on short term use. Used for Trimming: They are excellent for trimming small shapes into stones. This simply means that these blades are meant for small material, not large or slabbing techniques. Also, these blades operate in a single direction so make sure that the arrow on the blade is pointed towards you when mounting. Use with water as a lubricant. New, Unused Blade – Not in Original Packaging These blades were originally packaged in oil so you will see several oil spots on the surface. We will send out your order within 1-2 days after payment has been received and cleared. Please let us know if you are looking for other accessories or hardware. We Can List Any Size( Outer Diameter from 60mm – 250mm) & Amount Of This Product
150mm 6″ THK Sintered diamond segment Super thin saw blade Jewelry Lapidary disc
Our products are in use at many of the larger projects such as, the HK airport and HK Disney Land. Suitable for jewelry, glass, gemstone or lapidary. Even it’s suitable for both Wet or Dry cut, the blade would be more durable if you can add water as coolant (if possible) during cutting.
6 inch 150mm SINTERED Diamond Lapidary Saw Blade Cutting Jewelry Tools for Stone
6″ 150mm SINTERED Diamond Blade Saw Lapidary Saws Rock Slab Trim Code WYP-150-20 This is a new Sintered lapidary rock saw blade Product Specification: Product Name: 6 inch diamond saw blade, 150mm diamond blade, Lapidary diamond sawOutside Diameter: 150mm (6″)Core Thickness: 0.55mm (0.022″)Rim Thickness: 1mm (0.039″) ,at rim where diamonds areHole Diameter: 20mm (close to 3/4″) With the bushing 20-16mm and 20mm-12.7mm, can be used on 16mm (5/8″) or 12.7mm(1/2″) arbor with a bushingRim Width: 6mmQuantity: Only 1 PieceThis blade will perform well on any hardness rockDesigned for use on hard lapidary materials like agate, jasper, petrified wood, agates and geodesThe diamonds are sintered into the edge of the bladeMore diamonds in the sintered rim and a stiffer core make this blade cut faster and provide a long use-life, more durable than the Notched Rim Lapidary Diamond Saw BladeUse with light oil or water as a lubricantNew, Unused Blade – Not in Original PackagingThese blades were originally packaged in oil so you will see several oil spots on the surfaceDiamonds series blades are a great low cost choice for your lapidary sawWe will send out your order within 1-2 days after payment has been received and cleared Please let us know if you are looking for other accessories or hardware
12″ 300mm Diamond Lapidary Saw Blade Notched Rim for Stone Rock Slab Cutting
JINGLING 12″ Notched Rim Diamond Lapidary Saw Blade Slab Rock For Stone Code 300 1.0 16/25/25.4/32mm. Diamonds Series blades are a great low cost choice for your lapidary saw. Model:12 in Lapidary Saws.