Item Tag: Solder

3 Pieces Silver Solder Sheet Assorted Pack 1 Dwt Each Soft Medium & Hard Jewelry

SILVER SOLDER SHEET 3 PCS 1 – DWT OF EACH GRADE – SILVER CONTENT65% SOFT – 70% MEDIUM – 75% HARD Silver Solder for Jewelry Making and Repairs, set of 3 grades – includes 1 dwt (1.5g) each of Soft, Medium and Hard solder sheet (Each piece is about 1″ square). Soft Silver Solder Sheet, with a melting point of 1260o F – 682oC. with a Silver Content of 65% Medium Silver Solder, medium grade flow with a melting point of 1295o F – 702oC. with a Silver Content of 70% Hard Silver Solder Sheet, with a melting point of 1375o F – 746oC. with a Silver Content of 75% 🔸 Attention: Solder is made to be used with a Torch, NOT with soldering gun or iron. 🟢 We also sell the Flux for the solder visit our store see ebay listing >> https://www.ebay.com/itm/201274688116Solder is Cadmium, Lead & Indium FREE JETS Product # 1925-45331 Technical Information: – Repairs: Lower-temperature solder is recommended for repair work, especially on pieces that may have been reworked and a high-temperature solder may cause a problem. Assembly Work: In multiple components, soldering use the Higher Temperature Solder first, then a medium grade, and finally to a soft lower melting point. Production: High-temperature solder, the Hard grade should be used, with the higher silver content, better match of color, and a stronger bond. Allowing future repairs to be performed with the softer solders.Attention: These solders are made to be used with a high heat torch or butane torch in order to reach melting temperature, it is not intended to be used with soldering iron. NOTE: Visit JETS INC. our eBay Store, where you can see other grades of Solder along with listings of Alloy Metals, Brass, Copper, and Zinc, various gauges of Copper & Brass Wires, and a selection of Jewelers Equipment Tools and Supplies. JETSINC. E1 716 CKSP M

Silver Solder Sheet 75% Hard Flow 1 Dwt Jewelry Making Soldering Repair

SILVER SHEET SOLDER HARD FLOW1 DWT – SHEET – HARD – SILVER CONTENT 75%Silver solder sheets used in Jewelry making, repair work such as sizing and mounting, for assembling silver jewelry, rings and components.Silver solder comes in 4 grades… the grades are the relative temperature flow points between one and the other. The softer the solder the less content of silver with a lower melting temperature.Silver Solder comes in 4 different Grades of Hardness. – Extra Easy Soft > Content of Silver 56% – Easy Soft >Content of Silver 65% – Medium > Content of Silver 70% 🟢 Hard > Content of Silver 75%This Hard Silver Solder Sheet measures approximately 1″x 1″ Square, weight is 1 dwt (1.5g). The Hard Grade solder has a melting point of 1,365°F – 741°C. with a Silver Content of 75%. Flow temperature: 1,450°F – 788°C🔸 Attention: Solder is made to be used with a Torch, NOT with soldering gun or iron. 🟢 We also sell the Flux for the solder visit our store see ebay listing >> https://www.ebay.com/itm/201274688116Solder is Cadmium, Lead & Indium FREE Technical Information:Repairs: Lower-temperature solder is recommended for repair work, especially on pieces that may have been reworked and a high-temperature solder may cause a problem. Assembly Work: In multiple components, soldering use the Higher Temperature Solder first, then a medium grade, and finally to a soft lower melting point.Production: High-temperature solder, the Hard grade should be used, with the higher silver content, better match of color, and a stronger bond. Allowing future repairs to be performed with the softer solders.Attention: This solder is made to be used with a high heat torch or butane torch in order to reach melting temperature, it is not intended to be used with soldering iron.JETS Product # 1925-451HNOTE: Visit JETSINC. our ebay Store, where you can see other grades of Solder along with Flux, Alloy Metals, Brass, Copper, and Zinc, various gauges of Copper & Brass Wires, and a selection of Jewelers Equipment Tools and Supplies. JETS Inc. E1 324 CKSP