SILVER WIRE SOLDER SOFT MEDIUM FLOW – 70% Content- 5 FEET LONG – 20ga WIRESolder is Cadmium, Lead & Indium FREE Silver Solder Wire used in Jewelry Making, Repair work such as sizing and mounting, for assembling silver jewelry, rings and components. – Silver solder comes in 3 grades… the grades are the relative temperature flow points between one and the other. The softer the solder the less content of silver with a lower melting temperature. Solder Wire is 5 Feet long, (Approximately 1/4TOz). – 4.85 Dwt of Medium Silver Solder SPECIFICATIONS: JETS Product # 1925-452M – Solder WIRE: Silver Content of 70% – Melt temperature: 1,275°F – 691°C – Flow temperature: 1,360°F – 738°C – Solder Wire Thickness: 20ga – 0.032” – 0.81mm 🔸 Attention: Solder is made to be used with a Torch, NOT with soldering gun or iron. 🟢 We also sell the Flux for the solder visit our store see ebay listing >> https://www.ebay.com/itm/201274688116Technical Information: – Repairs: Lower temperature solder is recommended for repair work, especially on pieces that may have been reworked and a high temperature solder may cause a problem.Assembly Work: In multiple component soldering use the Higher Temperature Solder first, then a medium grade and finally to a soft the lower melting point. Production: High temperature solder, the Hard grade should be used, with the higher silver content, better match of color and a stronger bond. Allowing future repairs to be performed with the softer solders. Shipping: Via USPS MAIL NOTE: Visit JETS INC. our ebay Store, where you can see other grades of Solder along with listings of Alloy Metals, Brass, Copper and Zinc, various gauges of Copper & Brass Wires and a selection of Jewelers Equipment Tools and Supplies. JETSInc. 1E 714 CKSP Z
A collection of love and memories woven into the story of you.