SILVER SOLDER SHEET 3 PCS 1 – DWT OF EACH GRADE – SILVER CONTENT65% SOFT – 70% MEDIUM – 75% HARD Silver Solder for Jewelry Making and Repairs, set of 3 grades – includes 1 dwt (1.5g) each of Soft, Medium and Hard solder sheet (Each piece is about 1″ square). Soft Silver Solder Sheet, with a melting point of 1260o F – 682oC. with a Silver Content of 65% Medium Silver Solder, medium grade flow with a melting point of 1295o F – 702oC. with a Silver Content of 70% Hard Silver Solder Sheet, with a melting point of 1375o F – 746oC. with a Silver Content of 75% 🔸 Attention: Solder is made to be used with a Torch, NOT with soldering gun or iron. 🟢 We also sell the Flux for the solder visit our store see ebay listing >> https://www.ebay.com/itm/201274688116Solder is Cadmium, Lead & Indium FREE JETS Product # 1925-45331 Technical Information: – Repairs: Lower-temperature solder is recommended for repair work, especially on pieces that may have been reworked and a high-temperature solder may cause a problem. Assembly Work: In multiple components, soldering use the Higher Temperature Solder first, then a medium grade, and finally to a soft lower melting point. Production: High-temperature solder, the Hard grade should be used, with the higher silver content, better match of color, and a stronger bond. Allowing future repairs to be performed with the softer solders.Attention: These solders are made to be used with a high heat torch or butane torch in order to reach melting temperature, it is not intended to be used with soldering iron. NOTE: Visit JETS INC. our eBay Store, where you can see other grades of Solder along with listings of Alloy Metals, Brass, Copper, and Zinc, various gauges of Copper & Brass Wires, and a selection of Jewelers Equipment Tools and Supplies. JETSINC. E1 716 CKSP M
A collection of love and memories woven into the story of you.